Product Description
The right way to use?
The right way to use?
1. Use as a standalone alarm system.
Join the decision level to alarm siren and energy supply. 9V 12V or 24V DC Energy Constructive hook up with LOOP + of name level, Energy Damaging hook up with LOOP – of name level, One other LOOP + hook up with + at siren, Swith terminal with black wire hook up with – at siren. Push in after which pull down on the deal with prompts the normally-open alarm change. As soon as latched within the down place , the phrase” ACTIVATED” seems on the prime in vivid yellow, with a portion of the deal with protruding on the backside as a visual flag, the siren will sound.
2. Use with standard panel.
The hearth alarm management panel Zone wire may be linked to terminal loop(+), loop(-) unpolarized wire. If the handbook name level is in the long run of the zone wire, a 5.6K resistance must be linked to terminal loop(+), loop(-)
Technical Parameter:
Dimension: 140mmX105mm
Peak: 45 mm
Weight: 220 g
Working Temperature Vary: -10°C to 50°C
Working Humidity Vary: 10% to 93% Relative Humidity, Noncondensing
Latching Alarm: Reset by momentary energy interruption
Electrical Scores
System Voltage (nominal): 24 VDC (9V~ 28VDC)
Standby Present: 60 μA @ 24VDC
Alarm Present: 10~30 mA @ 24VDC
It personal change terminal which might work with alarm siren or horn instantly. Switching voltage and present: <250V 2A, Max.500W.
Twin Motion Pull Station w/Key Lock, PUSH IN/PULL DOWN deal with latches within the down place to obviously point out the station has been operated.
Aesthetically pleasing, extremely seen design and shade.
For Standalone Alarm, 9V DC or 12V DC or 24V DC energy supply. Join energy anode to Loop +,Join energy cathode to Loop -. One other Loop + join + at siren bottom. Change terminal of black wire hook up with – at siren bottom.
Observe: Non UL Listed.What do you get: 1x Name Level Station, 2x Keys