Seco-Larm SD-R400-BQ ENFORCER Microwave RTE Sensor, 10ft (3m) Adjustable Sensing Range, 24.150GHz Sensor Frequency, 5cm/s Reaction Time, 8′ (2.5m) Cable Length, Indoor Use Only

Use the Seco-Larm Enforcer Microwave RTE Movement Sensor to supply no-touch ingress or egress in your property, for indoor use solely. This gadget has an adjustable output timer that can be utilized to set off any gadget with an egress enter and it may hook up with a gate opener or an entry management keypad. Contents: Microwave Sensor, (2) Mounting Screws, Mounting Template, 5-Pin Connector Cable, Guide. Working Voltage: 12 to 24 VDC. Present Draw: Standby: 23mA at 12VDC / 14mA at 24VDC, Lively: 39mA at 12VDC / 21mA at 24VDC. Sensor Frequency: 24.150GHz. Sensor Vary: 3 ft to 10 ft (0.9 – 3m), adjustable. Sensor Angle: Vertical: 0 levels to 90 levels, Horizontal: plus minus 30 levels. Detection Angle: Entrance/Again: 20 levels to 30 levels, Left/Proper: 60 levels to 70 levels. Min. Detection Velocity: 5cm/s. Output Relay: 2A at 30VDC (0.5A at 125VAC) Dry relay,NO/NC/COM. Relay Output Time: 1 to 33 s. Mounting Peak: 6 ft to 10 ft (1.8 to three m). Cable Size: 8 ft (2.5m). LED Indicator: Pink on relay activation. Case Materials: Black ABS and polycarbonate. Working Temperature: -4 levels Fahrenheit to 131 levels Fahrenheit (-20 levels Celsius to 55 levels Celsius). Dimensions: 3-1/8 x 2-3/8 x 2-1/8 inches (80 x 60 x 54 mm). Credentials: FCC, RoFC. Guarantee: 1 Yr. Producer Half #: SD-R400-BQ.
Gives no-touch ingress/egress
For indoor use solely, installs above a door
Detection space (10ft sensing vary) is horizontally and vertically adjustable
Constant detection in massive areas and over a variety of temperatures
Adjustable relay output time (1~33 second)
Gives no-touch ingress/egress
For indoor use solely, installs above a door
Detection space (10ft sensing vary) is horizontally and vertically adjustable
Constant detection in massive areas and over a variety of temperatures
Adjustable relay output time (1~33 second)