Motion Sensor Night Light,LED Night Lights Plug into Wall with Motion Sensor & Dusk to Dawn Sensor, Adjustable Brightness1-150LM,Motion Activated Night Light for Kids Adults Bathroom Bedroom,2Pack

Product Description

LED Night time Lights Plug into Wall, Movement Sensor Night time Gentle Plug in, 1-150LM Dimmable Night time Gentle Indoor for Hallway, Stairs, Bed room, Storage, Lavatory

1. Insert the lamp into the matching socket. After the product is powered on, the preliminary mild can be on for about 5 seconds. After the sunshine is off, the lamp will enter the traditional working situation.

2. Setting mode, pull the three-gear change: Flip off the sunshine within the OFF place. It’s nightfall to daybreak sensor evening mild mode within the NIGHT place. The nigh mild can be robotically activate when the ambient mild brightness is decrease than 15LUX and switch off when the ambient mild is larger than 20LUX.

3. AUTO place is in infrared sensing mode, the sunshine will flip off and stand by when the ambient brightness is larger than 15 LUX.When the ambient brightness is under 15LUX, folks transfer throughout the sensing vary then the sensing robotically lights up. After leaving, the lights will robotically flip off after a forty five second delay.

4. When the sunshine is on. Click on the CCT change to regulate three colour temperatures of the sunshine: heat white (3000K)

→ impartial white (4500K)→ cool white(6000K). Repeat this cycle. Preliminary colour temperature: Heat white (3000K).

5. When the sunshine is on. Click on LM change to regulate the 5 brightness of the sunshine: 10%→30%→50%→75%→100%.All colour temperatures can repeat this cycle. Preliminary brightness: 10%.

6. The lamp can robotically keep in mind the adjusted brightness and colour temperature when it’s always powered on.

Directions

1. Enter voltage: 100-240V 50Hz/60Hz Most energy: 2.0 W Most Luminance: 160LM

2. Three colour temperatures of the sunshine: heat white (3000K) Impartial White( 4500K) Cool White 6000K)

3. Gentle supply: 2835 Two colour temperature LED Amount: 6 PCS

4. Sensing Distance: 3-4 meter.

5. Sensing Angle: 120 diploma.

6. Canning Materials: Physique: ABS plastic Lampshade: PC plastic

7. Dimension: 66 X 65 X 45mm

Consideration

1. The working temperature is -10℃~+50℃.

2. The entrance of the lamp shouldn’t be obstructed, which impacts the pure mild irradiation of the photodiode.

3. The entrance of the lamp is open and doesn’t have an effect on the sensing vary.

4. Keep away from daylight, automotive lights, and incandescent lights to light up the lamp immediately.

5. Don’t instal in foggy or water drenched areas.

Bed room

Stairs lighting

Bathroom mild

Hallway

Product Dimensions ‏ : ‎ 2.6 x 1.77 x 2.5 inches; 3.2 ounces
Merchandise mannequin quantity ‏ : ‎ XS-016
Date First Accessible ‏ : ‎ September 30, 2024
Producer ‏ : ‎ QYKAVM
ASIN ‏ : ‎ B0DJ84JJ62
Nation of Origin ‏ : ‎ China

1.Mannequin: XS-016. The lamps might be adjusted in three modes, three colour temperatures and 5 brightness ranges.(CCT OFF NMGHT AUTO LM)
2.Change the adjustment mode: OFF place to show of the sunshine. NIGHT place is nightfall to daybreak sensor evening mild. AUTO place is the human infrared sensor mild.
3.Click on the CCT change to regulate three colour temperatures of the sunshine: heat white (3000K)-→ impartial white (4500K)>cool white(6000K).
4.Click on LM change to regulate 5 brightness of the sunshine: 10%→30%→50%→75%→100%.
5.It’s used for automated lighting in hal, coridor, rest room, storage, bed room and different locations with sockets.