5pcs HC-SR501 PIR Infrared Motion Sensor Human Body IR Movement Detector Sensor Module for Arduino for Raspberry Pi

Product Description

HC-SR501 PIR Movement Sensor

Human Physique Pyroelectricity Infrared PIR Movement Detector Sensor Module

Working voltage vary: DC 4.5-20VQuiescent Present: <50uATrigger: L can’t be repeated set off/H will be repeated set off (Default repeated set off)It has pin header to pick out set off modeDelay time: 0.5-200S (adjustable) the vary is (0.xx second to tens of second)Block time: 2.5S (default)Could be made a variety (0.xx to tens of seconds)Board Dimensions: 32mm*24mmAngle Sensor: <100 ° cone angle Lens sizeHC-SR501 Sensor Diameter: 23mm(Default) Utilization

This PIR movement sensor can routinely and shortly open varied kinds of incandescent, fluorescent lamps, buzzer, computerized doorways, electrical followers, computerized washer and dryer Machines and different units, it’s a excessive tech merchandise.

Particularly appropriate for enterprises, resorts, purchasing malls, warehouses and household aisles, corridors and different delicate Sense of area, or for the safety zone computerized lighting, lighting and alarm techniques. Additionally, it could work with Arduino or Raspberry Pi tasks.You need to use these sensors to attach lamps at residence as nicely.

Package deal Included: 5 X Stemedu HC-SR501 PIR Infrared Movement Sensor

Adjustable Delay Time

With induction blocking time (default setting: 3-4 seconds): After every induction output (excessive stage to low stage), the induction module can set a blocking time instantly, and sense on this time interval The machine doesn’t obtain any induction sign. This operate can notice the interval work (induction output time and blocking time), and will be utilized to interval detection merchandise; on the similar time, this operate can successfully suppress varied interferences generated throughout load switching.

Options

1. Totally computerized induction: When somebody enters its sensing vary, enter excessive stage, and when folks go away the sensing vary, it would routinely delay and switch off excessive stage. Output low stage.2. Photosensitive management (non-obligatory): The module has a reserved place, which will be set for photosensitive management, and doesn’t sense throughout the day or when the sunshine is robust. Photosensitive management is an non-obligatory operate, and no photoresistor is put in on the manufacturing unit. If mandatory, please buy the photoresistor individually and set up it your self.3. Two set off modes: L can’t be repeated, H will be repeated. It may be chosen by jumper, the default is H.A. Non-repeatable set off mode: After the excessive stage is sensed, the output will routinely change from excessive to low as quickly because the delay time ends.B. Repeatable set off mode: After the induction output is excessive, throughout the delay time, if there’s a human physique transferring inside its sensing vary, its output will stay excessive till the individual leaves. The delay will likely be excessive. The extent adjustments to a low stage (the sensing module will routinely prolong a delay time interval after detecting every exercise of the human physique, and the time of the final exercise is the start line of the delay time).4. Micro energy consumption: 65 microamps of quiescent present, particularly appropriate for electrical merchandise powered by dry batteries.

Directions to be used

1. After the induction module is powered on, there’s an initialization time of about one minute, throughout which period the module will output 0-3 instances at intervals, and enter the standby state after one minute.2. Attempt to keep away from interference sources equivalent to lights straight on the lens on the floor of the module, in order to keep away from introducing interference indicators and inflicting misoperation; attempt to keep away from the use surroundings The wind won’t circulate, and the wind may even trigger interference to the sensor.3. The sensing module adopts a dual-element probe. The window of the probe is rectangular. The twin components (A-element and B-element) are positioned at each ends of the longer course. When the human physique walks from left to proper or from proper to left, the infrared spectrum reaches the twin component. There’s a distinction within the time and distance of the sensor. The bigger the distinction, the extra delicate the sensor. When the human physique walks towards the probe from the entrance or from high to backside or from backside to high, the twin component can’t detect the change within the infrared spectrum distance, no distinction Due to this fact, the sensor is just not delicate or doesn’t work; subsequently, when putting in the sensor, the course of the twin component of the probe needs to be as parallel as doable to the course the place the human physique strikes probably the most, in order to make sure that the human physique is sensed by the twin component of the probe when it passes by. As a way to improve the sensing angle vary, this module makes use of a spherical lens, which additionally makes the probe sense on all sides, however the left and proper sides are nonetheless bigger than the higher and decrease instructions, and the sensitivity is stronger. The set up should nonetheless comply with the above necessities as a lot as doable.

Add to Cart

Buyer Opinions

—

4.5 out of 5 stars

2

4.7 out of 5 stars

22

—

5.0 out of 5 stars

1

—

Value

— $44.98$44.98
—
—
—
—

Interface
Kind-C Kind-C Kind-C Kind-C Kind-C Kind-C

Package deal consists of 1
2 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board 1 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board 2 x 0.96″ OLED WiFi Lora ESP32 Kind-C (V3) Board

Package deal consists of 2
2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 1 x 915MHz U.FL IPEX to SMA Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi 2 x 868MHz 915MHz GSM IPX IPEX 1.13 UF.L Lora Antenna 2dBi

Package deal consists of 3
2 x Case for Lora ESP32 Kind-C Board Terminal wire for lithium battery + pin header Terminal wire for lithium battery + pin header 5 x 915MHz U.FL IPEX to SMA Lora Antenna 2dBi 2 x Case for Lora ESP32 Kind-C Board 5 x 1 Slot 18650 Battery Holder Case

Package deal consists of 4
2 x 915MHz Antenna 5DBi SMA Male Omni-directional antenna Terminal wire for lithium battery + pin header 2 x 915MHz Antenna 5DBi SMA Male Omni-directional antenna Terminal wire for lithium battery + pin header

Package deal consists of 5
Terminal wire for lithium battery + pin header Terminal wire for lithium battery + pin header

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Buyer Opinions

—

4.7 out of 5 stars

20

4.2 out of 5 stars

22

4.1 out of 5 stars

38

4.0 out of 5 stars

174

4.3 out of 5 stars

17

Value

$27.90$27.90 $8.98$8.98 $9.98$9.98 $9.98$9.98 $8.98$8.98 $21.90$21.90

Product identify
ESP32 Capacitive Contact Display screen 3.5″ Yellow Show Module ESP32-3248S035C BT+WiFi Growth Board ST7796 ESP32-WROOM-32 with Built-in Show 480×320 TFT 3.5 inch for Arduino IDE 600PCS/BOX 1/4W Steel Movie Resistor Assortment Package, 1% Resistors Assorted Set, 10 Ohm-1M Ohm Resistance Pack 240pcs Multicolored Dupont Cable 20cm 10cm Breadboard Prototyping Wires Package 3PCS LM2596 DC to DC Buck Converter 4-40V to 1.25-37V Adjustable Voltage Regulator Step-Down Module with LED Voltmeter Show 3A 5PCS RCWL-0516 RCWL 0516 Microwave Radar Sensor Human Sensor Physique Sensor Module Induction Swap Module Output 3.3V ESP32 Touchscreen 2.8inch TFT LCD Show ESP-WROOM-32 ILI9341 Resistive Contact Module 240 * 320 ESP32-2432S028R Bluetooth WiFi Twin Core Growth Board

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Buyer Opinions

5.0 out of 5 stars

11

4.9 out of 5 stars

12

4.7 out of 5 stars

17

4.5 out of 5 stars

8

4.8 out of 5 stars

21

4.4 out of 5 stars

29

Value

$29.99$29.99 $9.99$9.99 $8.98$8.98 $8.99$8.99
— $5.98$5.98

Product
60KG Digital Servo Giant Torque Steering Motor Stainless Metal Steel Gear RC Servo Excessive Pace 0.13sec/60 Diploma at 8.4V for Robotic & 1:5 RC Automobile (Management Angle 270 Diploma) 2/3/4 x 1.5V AAA Battery Holder Case with Wire Leads, 6PCS AAA Battery Field with ON/Off Swap, 5PCS 9V I Kind Laborious Shell Snap Battery Clip Buckle Lead Wire (Pack of 11) 5PCS Capacitive Analog Soil Moisture Sensor Module 3.3~5.5V Corrosion Resistant Humidity Detection Sensors DIY Digital 3pcs AIP31066 1602 LCD Show Module with Blue Backlight 51 Studying Board LCD1602 16×2 LCM Characters LCD for Ar-duino 42PCS Solderless Double-Sided Protoboard Common PCB Board Prototype Package Digital Breadboard with 6 Sizes (2×8 3×7 4×6 5×7 6×8 7x9cm) for Arduino DIY Mission 5PCS Wire Lead Battery Storage Field Case Holder for 18650 Button High Single Battery

HC-SR501 Delay Time: 0.5-200S (adjustable), the vary is (0.xx second to tens of second), the delay time will be adjusted through the use of the potentiometer on the HC-SR501 movement sensor.
Working voltage vary: DC 4.5-20V; Quiescent Present: <50uA; Set off: L can't be repeated set off/H will be repeated set off (Default repeated set off)
Mechanically and shortly activate residence units by detected HC-SR501 movement sensor.
HC-SR501 movement sensor is an financial hightech merchandise. It’s extensively used.
Angle Sensor: <100 ° cone angle Lens dimension