Door Alarms When Opened for Kids Safety/Home Security, Window Alarm Sensors, Glass Break Sensor, Female Voice Prompt,14 Melodies 3 Volume Levels Mute Mode, Toddler Pool Travel Door Alarm

Product Description

Set up Vibration Sensor

Near the Vibration Supply.

Suggest to put in it close to the door deal with, close to the rail of sliding door or window.

Stick it with the velcro tape or hold it with rope

Set up Magnetic Door Sensor

Align the notch of the alarm and the magnetic strip

The set up hole between alarm and magnetic strip≤0.4in

Energy on: Please open the again cowl and swap it on.

LED blinks in case of low battery.

Set up the Receiver

Step1

Plug the whip antenna and energy wire into socket

Step2

Flip the facility swap to On

Distant Management

Arm, in arm mode, all detectors are monitored, Inexperienced Led indicator.

Disarm, exit arm mode, no detectors are monitored, Pink Led indicator.

Dwelling arm, partial detectors are monitored, Pink Led indicator.

SOS, an emergency alarm.

Preserve Toddlers Away

Prepared to discourage any undesirable actions, preserve child away from energy strip, hazard field, window and many others.

Stick it with the velcro tape. Put it wherever you want it

Pool Door Alarm

Pool door alarms for dwelling, defend your youngsters secure.

By no means miss any buyer

Notify you door chime for enterprise when coming into

Journey Door Alarm

Resort door alarm sensor, you may carry it as a safety on your journey or enterprise journey, it will likely be your finest safety companion.

Shield Your Property

Provide you with a warning in case your valuables field, drawer, paintings any motion detected, defend your property.

Function Vary

The working vary is 250ft within the open space.

Prolong the telescopic antenna and modify the angle for optimum reception.

Simple to exchange the batt

Step 1: Loosen the screw

Step 2: Exchange the batt

Step 3: Shut the duvet and tighten the screw

Kits

1 x Receiver

3 x Vibration Sensors

1 x Magnetic Door Sensor

1 x Distant Management

1 x Person Guide

1 x Antenna

1 x Energy cable

3 x Velcro stickers

Add to Cart

Add to Cart

Buyer Opinions

3.5 out of 5 stars

94

3.9 out of 5 stars

34

Value

$37.99$37.99 $17.99$17.99

Specification
Toddler Door Alarm 2 Receiver+2 Door Sensors

Coloration
Inexperienced White

Expandable

✓

✓

LED indicators

✓

✓

Continuously Requested Query:

Q: The way to set up the vibration sensor?

A: Notice near the Vibration Supply. Suggest to put in it close to the door deal with, close to the rail of sliding door or window. Stick it with the velcro tape(included) or hold it with rope(not included). No wiring and instruments are wanted!

Q: The way to set up the door sensor on the body of the door?

A: The hole between the magnet strip and the door sensor is inside 0.2 inches (0.5cm) when the door is closed.

Q: The way to set up a receiver？

A: Please view the Instruction Guide“Station Set up”

Q: The way to improve the working vary indoor？

A: Prolong the telescopic antenna and modify the angle for optimum reception.

Q: The way to change the ring tones? And make the sensors with totally different ring tones?

A: A complete of 14 ring tones you may select.

First, let the sensor near the host earlier than you modify the ring tone >you have to set off the sensor letting the host know which sensor to be modified> Then press and maintain the SENSOR2 button of host>Launch the button while you hear the ring>Press SENSOR2 button as soon as to listen to one ring tone> Press SENSOR2 button once more to listen to subsequent ring tone, whole 14 ring tones > Press SENSOR1 button to verify the ring tone you select.

Q: The way to set the Quantity?

A: Press the VOL button to decide on excessive, medium, and low quantity

Q: The way to set the receiver silent? The way to Exit silent mode?

A: Press the MUTE button for just a few seconds till you hear “silent time”. Then the hub station swap to the silent mode, solely a light-weight flash shall be initiated on the hub station when the sensor is triggered.

Exit silent mode: Press the MUTE button once more just a few seconds till you hear “Good day”

Q: The way to pair further sensors with the receiver?

A: The manufacturing unit default sensors had been paired with a hub station. It is advisable pair the sensor by your self for those who purchase further sensors.

Press and maintain the SENSOR1 button > Launch the button while you hear the voice immediate “Please pair the newborn monitor sensor” > Set off the sensor inside 10 seconds > The station voice immediate “Pairing full” If the sensor had been paired, the monitor will voice immediate “Repeat pairing”

As much as 16 sensors may be added to the station

Q： Why is my receiver with out sound all of the sudden?

A: It could enter into Silent Mode, Please exit silent mode: Press the MUTE button once more just a few seconds till you hear “Good day”

Q: The way to swap the vibration detector to the decision button?

A: Change to the decision button: preserve urgent the center button of the vibration detector for just a few seconds till LED lights. You’ll be able to press center button to check.

Change again to vibration mode: preserve urgent the center button once more for just a few seconds till the LED is off.

【Peace of thoughts】Provide you with a warning when your toddler rise up at evening and slip out of bed room. Offer you peace of thoughts, figuring out that your youngsters are shifting. Pool door alarm, stop any mishap. Making a safer setting for the household.
【Prompt Alarm】 Door window alarm will alert when the door, window, cupboard are opened or window glass break. As well as, warn you in case your valuables field, drawer, paintings any motion detected. Offering complete safety safety.
【The way it Works of Vibration Sensor】It would sense vibration every time the door or window is opened/closed, or glass break, and the receiver will alert instantly.
【Set up Vibration Sensor】Notice near the Vibration Supply. Suggest to put in it close to the door deal with, close to the rail of sliding door or window. Stick it with the velcro tape(included) or hold it with rope(not included). No wiring and instruments are wanted!
【Out of Field】This kits have been paired earlier than supply. No want any app, easy operation.14 Melodies, the totally different sensor with totally different chime trace. 3 quantity ranges and mute mode, LED indicators. Feminine voice immediate operation. The function vary is 250ft in open space. As well as, we give you 60 days of cash again and a three hundred and sixty five days free guarantee. Please be at liberty to contact us you probably have any questions.