Dusk to Dawn Sensor for Outdoor Lighting 120-277V Photoelectric Switch Photocell Light Sensor Hardwired Post Eye Light Suitable


$14.99

Dusk to Dawn Sensor for Outdoor Lighting 120-277V Photoelectric Switch Photocell Light Sensor Hardwired Post Eye Light Suitable

Product Description

dusk to dawn sensordusk to dawn sensor

light sensorlight sensor

Specs:

Rated Voltage: 120-277VAC

Rated Frequency: 50/60Hz

Rated Loadings: 500W Tungsten/850VA Ballast/5A E-Ballast

Energy Consumption: 2W

Function Stage: 10~20Lx On/30-80Lx Off

Ambient Temp: -40℃~+70℃

Associated Humidity: 99%

photo cells for outdoor lightphoto cells for outdoor light

How you can join:

一、The black wire is the bottom (-) of the battery connector or energy supply, the load widespread or floor is just not concerned with this connection

二、The white wire is the optimistic (+) of the change (the optimistic connection of the load goes to the optimistic of the battery collectively in parallel )

三、The purple wire(the precise switched wire) is the bottom (-) of the sunshine, It switches the bottom to the load.

photocell sensor photocell sensor

Connection technique:

一、The WHITE wire AND the Optimistic Connection of the Load goes on to the optimistic connection of the supply or battery. Each wires. The load and the change optimistic in parallel.

二、The BLACK wire from the change goes on to the damaging or floor of the supply or battery. Notice: This would be the solely floor or widespread connection to the supply or battery.

三、The RED wire is the precise switched wire. It switches the bottom or widespread connection of the load to the supply or battery. The purple wire of the change connects to the load widespread or floor.

light sensor for outdoor lightinglight sensor for outdoor lighting

Package deal Dimensions ‏ : ‎ 7.28 x 4.06 x 2.05 inches; 6.38 ounces
Merchandise mannequin quantity ‏ : ‎ EP-DTDS-3PCS
Date First Obtainable ‏ : ‎ June 21, 2023
Producer ‏ : ‎ EPLZON
ASIN ‏ : ‎ B0C8RTVSV8

Rated Voltage: 120-277VAC;Ambient Temp: -40℃~+70℃;Sensing distance: 3-8M; Load energy:500W;Energy Consumption: 2W
Automated change: Mechanically management lighting primarily based on environmental lighting stage; The interior design has an automated ambient gentle stage detection circuit that may be routinely turned off in the course of the day and turned on at night time. As well as, a preset 3 to 10 second delay can keep away from misoperation brought on by spotlights or lightning at night time
Out of doors design: Out of doors lighting fixtures and photoelectric switches are geared up with waterproof covers, with a safety stage of IP65 for outside use. The twin safety sensor lens can keep away from dust and dirt, and assist the change work higher in harsh environments similar to rain, wind, snow, and so forth.
Simple to put in: The sunshine controller can be utilized along with most hardwired outside lights and bulbs, which require a mounting gap with a diameter of lower than 0.6 inches. Disconnect the ability provide, take away the junction field cowl, place the Phototube optical change within the tapping gap, and repair it with the lock nut.
Vast utility vary: appropriate for automated switching management of photo voltaic LED lights, road lights, courtyard lights, hall lights, and different lights (please do not forget that LEDs use DC energy, different voltages will not be relevant); may also be used as photoelectric switches for small rainproof road gentle controllers