ELEGRP Single Pole Occupancy Motion Sensor Light Switch 1 Pack, PIR Infrared Motion Activated Switch, Need Grounding Wire, No Neutral Wire, for CFL/LED/Incandescent, with Plate, UL(Matte White)
$15.99 $16.99
Product Description
ELEGRP LIGHTING CONTROLS–Movement Sensor Gentle Switches
INNOVATIVE PIR TECHNOLOGY
The ELEGRP movement sensor swap makes use of passive infrared (PIR) detection know-how through a segmented Fresnel lens to watch a room for occupancy. This specialised lens divides the sphere of view into sensor zones. When an individual passes into or out of a sensor zone, the sensor detects movement and switches the lights on. If the sensor detects human movement earlier than the TIME delay elapses, the sensor will re-clock for one more TIME setting cycle earlier than it robotically turns off the masses. If the sensor swap is saved being triggered by human motions, it’ll maintain the sunshine on till time delay elapses and no human movement is being detected throughout this era, or manually switched off.
—————————————————————————————————————————————————————————-
Works with 300W LED, 300W CFL and 600W incandescent gentle bulbs available on the market.Extraordinarily low standby energy consumption. Flame resistant materials has reached the very best grade of 5VA. UL & CUL listed.
MULTIPLE SETTING MODES – Options a number of setting modes for various utilization eventualities at dwelling
————————————————————————————————————————————————————————————————————
Set It Into An Occupancy Sensor Swap – OCC Mode: Automated ON & Automated OFF
Set delay TIME to ” • ” , “0”, “1” , “2” or “3” as desired.Set human physique SENSOR sensitivity as desired.Set LIGHT sensitivity to “1”, “2” or “3” as desired. DO NOT set the LIGHT to ” • “.
The system will activate the masses robotically when triggered by movement and switch off the masses robotically when the time delay elapses.
——————————————————————————————————————————————————————————
Set It Into A Emptiness Sensor Swap – VAC Mode: Handbook ON & Automated OFF
Set delay TIME to ” • ” , “0”, “1” , “2” or “3” as desired.Set human physique SENSOR sensitivity as desired.Set LIGHT sensitivity absolutely counterclockwise to ” • ” to disable computerized ON operate.
The system will activate the masses manually solely and switch off the masses robotically when the time delay elapses.
————————————————————————————————————————————————————————————————————
LARGE COVERAGE
This movement sensor swap supplies an adjustable 120-degree area of view with non-compulsory changes for sensitivity, ambient gentle override, and delayed off time. The sensor detects movement in areas as much as 900 sq. toes and as much as 35 toes from the sensor, ideally suited for the porch, closet, storage, hallway, stairs, basement, pantry and laundry room, and many others.
——————————————————————————————————————————————————————————-
The within LED indicator will flash when the sensor detects human motions.
Set up the sensor swap about 4 toes from the ground to get a greater expertise.
Sizzling objects or shifting air currents can have an effect on the efficiency of the sensing swap.
The sensing swap requires an unobstructed view of room occupants to detect movement.
—————————————————————————————————————————————————————————————————————
Get pleasure from Power Saving, Handy and Protected Life
Power Financial savings
Save value and vitality by having the unused lights and followers turned OFF robotically, stopping the sunshine from turning on whether it is already shiny. By no means go away a light-weight on by mistake once more.
Emptiness mode’s manual-ON function saves additional vitality by making certain lights are solely turned on when wanted.
Arms Free
Preserve your lighting management hands-free as you stroll into your own home with groceries or into the laundry room with a full basket. The movement sensor swap is right for rooms you sometimes enter along with your palms full, no matter whether or not they’re positioned within the dwelling or office.
Security
ELEGRP SP17OS movement sensor gentle swap is the secure alternative for seniors, youngsters, and staff, ensuring that lights robotically flip ON permitting occupants to see the place they’ll cut back the chance of trip-and-fall accidents.
Essential FAQ:
1. Q: My home doesn’t have the bottom wire, can I take advantage of the impartial wire as an alternative?
A: No! This movement sensor swap requires an efficient floor wire. Examine your own home earlier than ordering. The impartial wire will not be required to attach.
——————————————————————————————————————————————————————————
2. Q: I linked all of the wires, together with the bottom wire, but it surely didn’t work. Is the swap defective?
Q: I linked all of the wires, however the gentle stays on on a regular basis, I couldn’t flip off the sunshine even manually. Is the swap defective?
A: There could also be 2 causes:
1): The Sizzling and Load wires are reversed. Please merely reverse the black and purple wiring of the sensor swap, and take a look at once more.
2): The bottom wire will not be linked properly or the bottom wire is ineffective. Please seek the advice of knowledgeable electrician.
——————————————————————————————————————————————————————————
3. Q: How do I do know whether it is wired appropriately or not?
A: Please examine if the LED indicator contained in the movement sensor swap flashed or not while you approached it?
1) If sure, it signifies that this movement sensor swap was wired appropriately.
2) If not, it signifies that this movement sensor swap was false wired or un-grounded. Please rewire the sensor swap. If the LED contained in the movement sensor nonetheless does not flash, essentially the most possible trigger is that the bottom wire is ineffective, please seek the advice of knowledgeable electrician.
———————————————————————————————————————————————————————————————————
Word: Please don’t press the swap button repeatedly. Press it as soon as each 3 seconds.
PRODUCT SPECIFICATION
Enter Score: 120 – 277V, 60Hz
Lamp Kind: 300W LED, 300W CFL, 600W Incandescent
Swap Kind: Single Pole Management
Wire Gauge: #14 – #12 AWG
Wiring Kind: Terminal cap
Working Temperature: 32℉ to 104℉ (0℃ to 40℃)
Product Dimension: 4.17×1.73×1.77″ (106x44x45mm)
Wall Plate Dimension: 4.5×2.75” (114.3×69.8mm)
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Buyer Critiques
4.3 out of 5 stars
3,136
4.3 out of 5 stars
2,623
4.6 out of 5 stars
22
3.9 out of 5 stars
83
4.2 out of 5 stars
369
4.0 out of 5 stars
143
Worth
— $16.99$16.99 $15.99$15.99 $34.99$34.99 $22.99$22.99 $16.99$16.99
Single Pole
✓
✓
✓
✓
✓
✓
3-way
Not for 3-way
✓
Not for 3-way B0BHQVTHK3 B0BHQW5J58 B0BHQWZ23H
Most Load
300W Dimmable LED, 300W CFL, 600W Incandescent 300W Dimmable LED, 300W CFL, 600W Incandescent 200W LED/CFL, 500W MLV and 500W INC/HAL. 5A for Ballast(120V), 1/6HP Fan(4.4A 120V) 150W LED/CFL, 450W INC/HAL 150W LED/CFL, 450W INC/HAL 150W LED/CFL, 600W INC/HAL
Wall Plate
Customary measurement screwless wall plate Customary measurement screwless wall plate Customary measurement screwless wall plate Customary measurement screwless wall plate Customary measurement screwless wall plate Customary measurement screwless wall plate
Product Dimensions : 4.57 x 2.8 x 1.93 inches; 5.61 ounces
Date First Accessible : December 20, 2023
Producer : ELEGRP
ASIN : B0CQMSN8Y3
Nation of Origin : China
【NOTES T0 BUY】 Grounding Wire is Required. The system won’t operate if it isn’t grounded or the bottom wire doesn’t work. Use the bottom wire within the wall field for floor connection. If no floor is out there, seek the advice of an electrician.
【120° Sensor Protection】This movement sensor swap supplies an adjustable 120-degree area of view with non-compulsory changes for sensitivity.The sensing swap requires an unobstructed view of room occupants to detect movement.Set up the sensor swap about 4 toes from the ground to get a greater expertise.
【Common Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent gentle bulbs available on the market.
【Single Pole Management】 Can be utilized as single-pole management. Options a number of setting modes of Automated or Handbook ON/OFF for various utilization eventualities at dwelling. (NOT appropriate for 3 manner circuit)
【Excessive High quality】 Extraordinarily low standby energy consumption. Power saving and lengthy working life. Flame resistant materials has reached the very best grade of 5VA. UL & CUL listed.
Clients say
Clients like the benefit of set up and design of the digital swap. They point out the directions are clear, and the product appears good. Some recognize the worth for cash and sensitivity. Nonetheless, some prospects dislike the turn-off function. Opinions differ on performance, movement sensor sensitivity, and high quality.
AI-generated from the textual content of buyer evaluations
