NATIKA Backup/Front/Side View Camera: No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount CVBS | AHD Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans

Product Description

As a burgeoning producer of top-notch OEM&ODM car digital merchandise, NATIKA goals to serve even essentially the most demanding wants of worldwide clientele.Invariably, we consider that buyer expertise counts excess of short-term income, so we make concerted efforts to design, manufacture, and enhance our services in an progressive and accountable style.

NATIKA backup digital camera WD-012 help flush or bracket mount choice, no distorted & fish-eye impact, starlight degree night time imaginative and prescient,IP69K IP score dependable waterproof and horizontal 135 levels extensive view angle.

Helpful Wire/Loop Management Design:

Reverse digital camera WD-012 with 2 small wires/Loops (White and Inexperienced coloration).

*If you happen to want the information line, please hold the inexperienced loop; If no want, simply reduce it; If you happen to use it as a entrance view digital camera, please reduce the white loop;

*If you happen to use it as a entrance view digital camera with out information line, please reduce each white and inexperienced wire/loop; If as a aspect view digital camera, please rotate the center housing a part of the digital camera (most 360 levels) to get a favor view angle; Look backward, hold the white loop; look ahead, reduce the white loop.

*Notice: this digital camera is a rear view digital camera with information line/parking line as DEFAULT.

*Please energy on once more after you narrow the small loops, then the picture must be right.

What you get:

1 x NATIKA Backup Digital camera; 1 x 26ft/8M Extension Wire; 2 x 304 Stainless Screws; 1 x Double Tape; 1 x Consumer Guide; 1 x Electrical Tape; 3 x Wire Clamps; 1 x Panel Remover; 7 x Zip Ties; 1 x NATIKA Present Field; 1 x Thanks Card; 1 x 0.886in/22.5MM TCT Gap Noticed; 1 x 304 Stainless Bracket; 1 x Metallic Entrance Housing

Notes:

*This NATIKA rear view digital camera WD-012 is ideal for REAR, FRONT and SIDE view.

*If join this NATIKA backup/entrance/aspect view digital camera WD-012 to a FACTORY RADIO, please individually order a suited Harness & Programmer to finish set up, as a result of completely different RADIO want completely different Harness & Programmer to work collectively.

* Mount this reverse digital camera on the panel and route the wire to inside (DO NOT pinch the wire/cable when route the wire, pinched wire will injury the digital camera, drill a gap to permit the wire undergo if wanted).

* In case your head unit with a reverse triggering wire, usually it’s a purple/white, blue/white or pink coloration wire, please discover it, and join it with the extension wire’s triggering wire properly(small quick purple wire subsequent to the RCA/AV connector).

*If the picture on the display screen is blurry, flickering/flash or has horizontal or vertical strip, please test all of your energy and video connections. Presumably use a distinct floor level(iron half) and wrap energy and video plugs with electrical tape to insulate from interference. If it nonetheless with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC energy adapter filter rectifier to unravel it, particularly want for Dodge VW AUDI BMW Mercedes Benz manufacturers car.

*Earlier than you routing, if there is no such thing as a picture on the display screen, apart from test the digital camera, please test show setting as properly. You should utilize different system with RCA connector, comparable to TV to test if the digital camera works.

* If you happen to use wire clamps for connection, please kindly test and see if it really works(connection is stable or not).

*For digital camera connection: join the digital camera’s male plug to feminine connector of the extension wire/cable, make sure that the arrows to align and push the digital camera’s male plug tightly into the feminine connector of the extension wire.

*If the digital camera is mounted offset, the rules on picture can be offset.

*Ideally to mount the digital camera on the center of the trim. If mount the digital camera at aspect, it nonetheless works, however with information line offset.

*Information line is for reference solely, please use the mirrors for place when backup.

*Apply electrical tape for the joint of all for the connectors, and use zip ties to lock the wire in your car.

*Seal the purple wire subsequent RCA/AV connector with electrical tape if you don’t use it.

*If you wish to get an ideal view angle, earlier than you utilize a drill rig to make a gap, please severely test and take a look at to search out the place is the very best spot to mount this reverse digital camera,please rotate the center housing a part of the digital camera (most 360 levels) or transfer the bracket (most 90 levels) to get the very best view angle.

Excessive Decision and Superb Night time Imaginative and prescient

NATIKA car reverse digital camera WD-012 built-in a LATEST excessive delicate STARLIGHT LEVEL night time imaginative and prescient HD 1/2.7inch CMOS IV picture sensor and a digital high-definition picture processor ISP(help 3D digital noise cancelling expertise) it’s most Pixels 1280*720, and efficient 960*576 pixels at 25 fps, additionally with grade A 6G All-glass,F1.8 giant aperture lens, transmit nice sharp and clear picture in day and night time. Base on completely different output format, the rear view digital camera WD-012 output is 600TVL, however it’s clear than the cameras whose authentic decision is 420TVL,480TVL, 520TVL and 600TVL. It help superb night time imaginative and prescient operate, the minimal illumination is 0.005Lux, say goodbye to grainy image!

IP69K Excessive IP Price Waterproof

IP69K waterproof IP charge NATIKA rear view digital camera WD-012. It designed with totally sealed glue filling craft, so the waterproof operate is healthier than IP67 and IP68, no want to fret about water, fog or mist inside.

Vast Relevant Temperature

NATIKA car rear view digital camera WD-012 built-in wide selection temperature digital elements and elements, the vary is from -22℉ to +185℉(-30℃ to +85℃), it’s nice weatherproof and might work completely not solely within the excessive temperature summer time but additionally in chilly winter or snowy climate, additionally outlasts harsh climate like thunderstorms, rain and extra, briefly it may possibly adapt to every kind of unhealthy climate.

No Distortion & Fish-eye Have an effect on REAL Image

NATIKA flush or bracket mount car reverse digital camera WD-012 use a LATEST 6pcs FULL glasses large-aperture optical system(embrace a grade A 6G All-glass+F1.8 giant aperture lens),so the image with none distorted & fish-eye impact, you’ll get a 100% REAL image while you backing up, and revel in a FULL REAL image!

Small dimension MINI 4PIN connector

NATIKA car reverse digital camera WD-012 with small dimension，diameter is 0.886in and stable supplies grade A zinc alloy housing.

5MM mini 4PIN connector for handy set up.

Superb Night time Imaginative and prescient

NATIKA car backup digital camera WD-012 reveals you clear image even very darkish areas, comparable to outside at night time or within storage, as a result of it built-in a modern 1/2.7inches low illumination degree 0.01Lux excessive delicate CMOS sensor and a Digital high-definition picture sensor processor(ISP), additionally with a grade A 6G All-glass and F1.8 giant aperture lens, delivers sharp and crystal clear image day and night time.

0.886in/22.5MM Sturdy & Strong TCT Gap Noticed

NATIKA flush mount entrance view digital camera WD-012 embrace a sturdy and stable tungsten carbide tip gap noticed, It might pierce lower than 0.315in/8mm chrome steel plates or lower than 0.7874in/20mm metallic plates very properly. And HSS(Excessive-Pace-Metal)gap noticed solely can pierce lower than 0.118in/3MM forged iron, aluminum, plastic or wooden supplies plates.

Helpful Vast View Angle

NATIKA flush or bracket mount car rear view digital camera WD-012 built-in a LATEST Grade A 6G All-glass and F1.8 giant aperture lens, the lens’ horizontal angle is 135 levels(seen vary as much as 95%), due to the 135° viewing discipline, you can see excess of you possibly can within the rear view mirrors alone. It lets you lower blind zone accidents very properly.(your youngsters and pets can be extra protected behind or in entrance of your automobiles).

Straightforward Set up

1. Discover a flat floor for mounting digital camera 2. Join the facility wire of flush mount backup digital camera to energy of reversing gentle 3. Join the 26ft extension cable of flush mount backup digital camera to the pinnacle unit of car.

NOTE: 1).Please take a look at the backup digital camera earlier than routing 26ft extension cable from again to entrance.

2).Related set off A with B in case your head unit with a set off wire A, If not, no want join them.

4.Begin the car and kit on reverse to check the digital camera.

5.Re-install the pinnacle unit.