Professional Shock-absorbing Metal Robot Tank Chassis with DC Encoder Motor for Arduino/Raspberry Pie, Tracked Suspension Absorption Vehicle, Remote Control Track Crawler Damping Vibration Caterpillar

Skilled Shock Absorption Metallic Robotic Tank Automotive Chassis Package with DC Encoder Motor for Arduino / Raspberry Pie
Introduction
Chassis suspension (suspension) system is the final title of all pressure switch gadgets between the body and the axle or wheel. The principle operate of suspension is to switch all forces and moments between the wheel and the physique, equivalent to supporting pressure, braking pressure and driving pressure, and ease the affect load transmitted to the physique from uneven highway floor, and attenuate the vibration brought on by it Make sure the consolation of passengers, cut back the dynamic load of cargo and car itself.

Tank Chassis Parameters

• Dimension: 275*190*95mm/ 10.83*7.48*3.74in (size*width*top)
• Internet weight: about 1.1kg/ 2.43lb
• Working voltage: 9-12v
• Load weight: 3-5 kg
• Materials: aluminum alloy
• Monitor: engineering plastic (4.1cm broad, freely detachable)
• Drive wheel: metallic
• Bearing wheel: metallic
• Impartial damping system

Motor Parameters

• Identify: 25mm gear motor
• Output velocity: 150±10percentrpm
• No_load present: 200mA (Max)
• Stall present: 4500mA(max)
• Stall torque: 9.5kgNaN
• Rated velocity: 100±10percentrpm
• Rated torque: 3000gNaN
• Rated present: 1200mA (Max)
• Noise: 56dB
• Working voltage: 9-12V
• Outdoors Shaft Size: 14.5mm
• Shaft Finish Play: 0.05-0.50mm
• Screw Dimension:M3.0
• Dia. Of Shaft phi 4mm, D3.5
• Encoder: 6pulses/circle
• Working voltage for sensor: 3-5V

Transport Record

• Metallic half: 1set
• Bearing wheel: 10pcs
• Driving wheel: 2pcs
• Plastic observe: 2pcs
• Encoder DC motor: 2pcs
• Screws equipment: 1set
• Others: a number of

【Shock Absorption Tank Chassis】: This shock absorbing tank automobile chassis has 10 pcs bearing wheels, 2pcs driving wheels, through which, 8pcs bearing wheels with 8pcs springs and suspension supporting holders with damping suspension system operate. Greater than 20pcs bearings, to make this tank automobile chassis runs easily with little friction.
【Skilled Design】: The metallic panel is specifically designed for the final management board, like Arduino uno / NodeMCU / Raspberry pie, which makes you assemble the controller board completely. Additionally, reserve many different set up gap areas for servos, sensors, and different electronics board. Specifically, this metallic panel additionally will be assembled into the wheel automobile with 25/37 motor brackets.
【Excessive Torque DC Motor】: Engine is essential for the automobile chassis. So, one pair excessive torque DC motor with encoder is supplied with this shock absorption robotic tank automobile chassis. Through the use of the encoder, you may get the velocity, wheel rotation, and different suggestions, which can allow you to do extra analysis work.
【Lear Extra】: You may know the robotic construction after you assemble the robotic tank chassis equipment, which incorporates DC encoder motor, body, wheel, shock suspension system. After that, you’ll be able to discover ways to distant management the tank by the controller, e.g., Arduino, Raspberry pie, Microbit, collectively AI robotic for automated driving with many sensors.
【What You Get】: This tank automobile chassis have many equipment, like bearing, driving and bearing wheels, observe, metallic body, screw equipment, and wrench instruments. Due to this fact, please be affected person to assemble the robotic chassis based on the handbook hooked up to this hyperlink. If have any drawback, please don’t hesitate to contact us. We’ll reply you inside 24h.