WattStopper DT-200 Dual Wall Occupancy Sensor, 360 Degree, 24V, White

The WattStopper DT200 Twin Expertise occupancy sensors mix superior passive infrared (PIR) and ultrasonic applied sciences into one unit. The mix of those applied sciences helps to eradicate false triggering issues even in tough functions. The DT200 turns lighting techniques on and off primarily based on occupancy and ambient mild ranges.The DT200 gives quite a few working modes that may be mixed to create the perfect customized management. The sensors could be confi gured to show lighting on, and maintain it on so long as both or each applied sciences detect occupancy. After no motion is detected throughout the time delay (5 to half-hour) the lights are switched off. A “walkthrough” mode can flip lights off after solely 3 minutes, if no exercise is detected after 30 seconds of an occupancy detection.The DT200 operates on 24VDC provided by WattStopper Energy Packs. DT200 sensors even have an remoted relay with Usually Open and Usually Closed contacts for interfacing with HVAC or EMS. Be aware: 24V sensors use the next energy pack (Offered Individually): Watt Stopper BZ50
Combines Passive Infrared and Ultrasonic Applied sciences SmartSet Routinely Selects Optimum Settings for every House Constructed-In Gentle Stage Sensor Accepts Low Voltage Change Enter for Handbook-On Operation Stroll-By means of Mode Will increase Financial savings Potential Remoted Relay Permits Sensor to Interface with Constructing Management Techniques